4099854307003

FLOODLIGHT PHOTOCELL 150

FLOODLIGHT PHOTOCELL 150 100W 840 15KLM PS BK

LED floodlight with integrated light sensor, for general outdoor and area lighting. Highly versatile due to selectable power steps (Multi Lumen) on the housing and automatically switches on and off according to the amount of available daylight.

Build-in driver.

Pre-installed, 1 m outdoor grade (H05RN-F), with copper wrapped single wires 3x1.0 mm².

Possible nominal wattage: 100 W / 83 W, Power factor: >  0.90, Possible luminous flux: 15000 lm / 12500 lm, Luminous efficacy: 150 lm/W, Standard deviation of color matching: 5 sdcm, Color rendering index: 80, Color temperature: 4000 K, Lifespan L70/B50 at 25 °C: 100000 h, Lifespan L80/B10 at 25 °C: 75000 h, Lifespan L90/B10 at 25 °C: 35000 h.

Housing made from die-casted aluminum, protected with powder coating. Bent, steel-based mounting bracket. Screws and washers made from stainless steel, protected by polycarbonate cover. Bracket and housing in black color, closest equivalent RAL 9017. 

Reflector based, symmetric light distribution with 100 ° x 100 ° beam angle. LED array protected by opal, tempered glass cover. Safe and very uniform illumination, due to frosted and tempered glass diffuser. Upper light output ratio (ULOR) 0%, when mounted horizontally at 0° incline. 

Fully integrated photocell light sensor, behind front glass. Detection threshold of daylight sensor: 35…95 lx: Product switch-on below 35 lx ambient light. Product switch-off above 95 lx ambient light. Sensor override for permanent light, via special mains switching pattern. 

Suitable for mounting on even surfaces, walls, ceilings and poles. Mounting bracket with 30° angle for easy installation access. Wide rotation area: 210°. Product orientation indicated via scale on bracket.

Indoor and outdoor application, suitable for operating ambient temperatures from -30…+50 °C. D-sign according to EN 60598-2-24 for fire-risk commercial unit, e.g. by accumulation of dust. Breather membrane to optimize air exchange, without compromising IP protection.

CE/CB/ENEC/EAC/UKCA

Protection class I, IP code IP66. IK code IK08. Glow Wire Test 650 °C  (IEC 60695-2-12). Surge protection: up to 6 kV (L/N-PE), D-sign according to EN 60598-2-24: Yes. Guarantee: 5 years.

Dimensions (incl. bracket): 266.00 mm x 55.00 mm x 343.00 mm, weight: 2828.000 g. Maximum wind load surface area (without bracket): 0,070 m².

Company: LEDVANCE GmbH

Article Number: 4099854307003

Article: FL 150 PCELL P 100W 840 15KLM PS BK